Polyethylene PE300 Sheet - HDPE
Bayani:
HDPE ba shi da wari, ba mai guba ba, yana jin kamar kakin zuma, yana da tsayayyar ƙarancin zafin jiki mai kyau, kwanciyar hankali mai kyau na sinadarai, takardar PE na iya tsayayya da yawancin acid da alkalis, baya narkar da kaushi na gabaɗaya a cikin dakin da zafin jiki, ƙarancin sha ruwa, rufin lantarki Kyakkyawan aiki da sauƙi waldi.Low yawa (0.94 ~ 0.98g / cm3), mai kyau tauri, mai kyau stretchability, mafi lantarki da dielectric rufi, low ruwa tururi permeability, low ruwa sha, mai kyau sinadaran kwanciyar hankali, mai kyau tensile ƙarfi, tsabta mara guba.
Ayyuka:
| Kyakkyawan juriya na lalacewa da rufin lantarki |
| Babban ƙarfi da ƙarfi, ƙarfin injin mai kyau |
| Taurin, ƙarfin ɗaurewa da kadarorin rarrafe sun fi na ldpe kyau |
| Kyakkyawan zafi da juriya sanyi, kewayon zafin aiki -70 ~ 100 ° C |
| kyakkyawan kwanciyar hankali na sinadarai, a dakin da zafin jiki, baya narke cikin kowane sauran ƙarfi, lalata acid, alkali da gishiri. |
Sigar Fasaha:
| Abu | Naúrar | Hanyar Gwaji | Sakamakon Gwaji |
| Yawan yawa | g/cm3 | ASTM D-1505 | 0.94---0.96 |
| Ƙarfin Ƙarfi | MPa | ASTM D-638 | ≥42 |
| Shakar Ruwa | % | ASTM D-570 | <0.01 |
| Ƙarfin Tasiri | KJ/m2 | ASTM D-256 | ≥ 140 |
| Karya Zafi Zazzabi | ℃ | Saukewa: ASTM D-648 | 85 |
| Harness na bakin teku | Shore D | ASTM D-2240 | >40 |
| Ƙwaƙwalwar ƙira | / | ASTM D-1894 | 0.11-0.17 |
Girman yau da kullun:
| Sunan samfur | Tsarin samarwa | Girman (mm) | launi |
| Hdpe takardar | extruded | 1300*2000* (0.5-30) | fari, baki, shudi, kore, da sauransu |
| 1500*2000* (0.5-30) | |||
| 1500*3000* (0.5-30) | |||
| 1600*2000*(40-100) |
Aikace-aikace:
| Aiwatar da bututun ruwan sha, bututun ruwan zafi, kwandon jigilar kayayyaki, Pump da abubuwan bawul. |
| Sassan kayan aikin likita, hatimi, yankan faranti da bayanan martaba |
| Ana amfani da shi sosai a masana'antar sinadarai, injina, wutar lantarki, sutura, marufi Abinci da sauran masana'antu |
| Ko'ina bisa ga bukatun abokin ciniki |
